- Auto Lighting System[10]
- Ice Scraper[1]
- Car Roof Racks[10]
- Other Exterior Accessories[1]
- Tire Covers[6]
- Windshield Wipers[8]
- Car Mats[10]
- Steering Wheel Locks[10]
- Other Auto Parts[10]
- Car Jacks[4]
- Emergency Tools[4]
- Tire Repair Tools[4]
- Alligator Clips[5]
- Inverters & Converters[4]
- Chains[7]
- Travel Bags[1]
- Winches[10]
- Other Security & Protection Products[10]
- Reflective Safety Clothing[3]
- Shoe Decorations[2]
- Spade & Shovel[5]
- Hammer[10]
- Wrench[9]
- Other Tools[6]
- Hand Tool Sets[1]
- Contact Person : Mr. Hoo Peter
- Company Name : Hangzhou Atli Technology Co., Ltd.
- Tel : 86-571-85839981
- Fax : 86-571-85839982
- Address : Zhejiang,Hangzhou,Room 536, Hangzhou E-commerce Industry Park, No 7 Cuibai Rd,
- Country/Region : China
- Zip : 310012
inverter for auto cars
Related Product Searches:inverter for auto cars,High Quality,car power inverter, car inverter 12v 220v,ATIP-300W
Product Features:
1.Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current.
2.It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. However ordinary capacitor will explode if the temperature become very high.
3.Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break.
4.All the protection signal adopt monolithic processing.Circuit is simple and stable.
5.Input and output are isolated to ensure the operation stability
6.Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady.
7.The whole design adopt patch technology.The circuit is simple and steady.
8.Optional remote ON/OFF control switch;
9.Smart protection function with LED and alarm show.
Parameter
| Model | I-P-PPI-800W | I-P-PPI-800W+R | |
| Remote control | NO | YES | |
| Rated output capacity | 600W | ||
| Peak power | 1200W | ||
| Input | DC 12V /DC 24V / DC 48V | DC 12V | |
| Output | Voltage | AC100V~120V or 200V~240V | |
| Frequency | 50Hz or 60Hz | ||
| Waveform | Pure Sine Wave | ||
| Regulation | Vrms <±5% | ||
| Efficiency | >85% | ||
| Total Harmonic Distortion | THD <3% | ||
| USB Output | DC 5V±5% 500mA | ||
| Protection Voltage/Current | Low Battery Alarm | DC 12V/10.5V ; DC 24V/21V ; DC 48V/42V | DC 12V/10.5V |
| Low Battery Shut Down | DC 12V/10V ; DC 24V/20V ; DC 48V/40V | DC 12V/10V | |
| High Battery Protection | DC 12V/15V ; DC 24V/30V ;DC 48V/60V | DC 12V/15V | |
| No Load Current | 12V / 400mA24V / 200mA48V / 100mA | 12V / 400mA | |
Intelligent Design Heat Auto Control | Fan Start : 42°C±3 , Fan Stop : 38°C±3 | ||
| High Temperature Shut Down : 63°C±3 , Restart Output : 55°C±3 | |||
| Indicate and alarm signal | Indicator | Inverter: Green LED ; Fault: Red LED ; Over Temperature: Yellow LED | |
| Low Battery Alarm | Alarm sounds:BiBi~BiBi~ | ||
| Low/High Voltage alarm | Alarm sounds:BiBi~ | ||
| Over Temperature protection | Alarm sounds: Bi~; LED indicate: Yellow | ||
Over Loaded protection; short circuit protection | Alarm sounds: BiBiBi~~; LED indicate: Red | ||
| Physical State | Size W×D×H(mm) | (225+25)*157*75 | |
| Packing size W×D×H(mm) | 295*203*90 | ||
| Net weight (kg) | 2.6 | ||
| Gross weight (kg) | 2.9 | ||
inverter for auto cars
